Nanolex SiShield is a ceramic coating developed to provide outstanding chemical and mechanical resistancy combined with great ease of use. Nanolex SiShield provides superb corrosion protection and hardness for all painted surfaces as well as metal and hard plastics. Thanks to a very high level of  hydrophobicity and density the layer formed by Nanolex SiShield will provide outstanding easy-to-clean properties.
Nanolex SiShield was developed, tested and produced in Germany.

Unlike traditional protective coatings such as car wax and conventional polymer coatings, where the protective efficiency decreases with time and from using degreasing or alkaline detergents or because of mechanical removal, Nanolex SiShield coating exhibits outstanding durability and a tough insensitivity to abrasion from frequent washing and the use of strong alkaline or acidic detergents.

Features & Benefits:

• Easy to apply
• Solvent and fluorine free
• High resistance to abrasion and weathering
• Produces a high gloss finish
• Enhances the paints clarity and colour
• Durability: 10000 km / 1 years

Important! Before using coatings make sure you wear suitable protection gear! We always recommend to use Nitril gloves and work in a well ventilated area or use a mask.

Temperature: apply between 10-30°C, avoid direct sunlight or high humidity

    
Apply directly to all clear-coated surfaces. The surface must be dry and free of any contamination or dust. Use Nanolex EX before application to remove all oils/fillers and dust. Frequently change microfiber cloths.

Keep the surface dry for at least 12 hours at ambient temperature. Do not wash the car within 72hours.
    
Curing can be speed up using infrared heaters. Using the heater immediately after applying can increase hydrophobic result dramatically!

When not removing oils/fillers using Nanolex EX nor degreasing correctly the coating can turn grey or haze after application of SiShield. Using PreWash can remove most of the contamination too.